Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ELECTRICAL CONNECTION
Attention: this hob includes a power cord with a plug. The connection is a 1 fase-connection.
• Check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.
• The earthing of the appliance is compulsory by law.
• Attention: the connection point must always be accessible.
ENERGY CONSUMPTION
Item
Induction hob
Cooking zone (left front)
Cooking zone (left rear)
Cooking zone (right front)
Cooking zone (right rear)
8
problems & solutions
If there is an error, an error code will be shown at the displays.
TROUBLESHOOTING TABLE
Problem
The appliance does not start.
The operation indicator on the
control panel shows U.
A cooking zone switches off
automatically. The operation
indicator shows H.
The operation indicator on the
control panel shows Lo.
BREAKDOWN CODES
The breakdown codes are shown on the timer indicator on the control panel.
Breakdown code
E3 / E6
E7 / E8
U
The appliance or a cooking
zone has turned itself off
unexpectedly, a tone sounds
and a breakdown code is
displayed.
Possible cause
There is no mains supply.
The appliance is locked.
The touch buttons are covered with
water or dirt.
There is no pan on the cooking zone.
The pan is not suitable for an
induction appliance.
The maximum cooking time is
reached. Refer to section Automatic
switch-off times.
The appliance is locked.
Possible cause
The appliance is overheated.
There is a defect in the mains supply.
There is no pan on the appliance
or the pan is not suitable for an
induction appliance.
A technical defect.
Energy consumption [Wh/kg] (*)
188,1
196,3
182,0
187,6
186,3
Possible solution
• Do a check if the mains plug is correctly
connected to the mains socket.
• Make sure that the mains supply is on.
Unlock the appliance. Refer to section Locking
and unlocking the appliance.
Clean the appliance. Refer to section Cleaning
& maintenance.
Put a pan on the cooking zone.
Use a pan that is suitable for an induction
appliance. Refer to section Cookware.
1. Start the appliance. Refer to section Starting
the appliance.
2. Select a cooking zone. Refer to section Using
a cooking zone.
Unlock the appliance. Refer to section Locking
and unlocking the appliance.
Possible solution
Let the appliance cool down before restarting
it.
Do a check on the voltage of the mains supply.
Place a pan or use a pan that is suitable for
an induction appliance. Refer to section
Cookware.
Please write down the breakdown code, unplug
the appliance and contact the customer
service of Inventum.
21
English
•
Werbung
