Personnel Protection Safety Rules - Autool Dm303 Bedienungsanleitung

Personnel
protection
safety rules
Use replacement batteries that have similar capacity,
design, chemical composition, service life, and come
from the same manufacturer. Mismatched batteries can
lead to gas formation and subsequent battery rupture.
Do not touch live conductors with voltages exceeding
30V AC RMS, 42V AC peak, or 60V DC.
Do not connect live conductors in a damp environment.
Do not use current measurement results as an indication
that a circuit is safe to touch. To determine circuit safety,
voltage measurements must be conducted.
Before using the product, inspect the casing for any
cracks or damage to plastic parts. Pay special attention
to the insulation near the ports.
Wear personal protective equipment (such as approved
rubber gloves, face shields, and flame-resistant clothing)
to protect against electric shocks and arc injuries when
working with exposed live conductors.
Always ensure you have a stable footing to safely control
equipment in case of emergencies.
6