a
Reading under maximum range
b
Measuring range
c
Maximum level
d
SPL indication
e
Battery exhausted
f
Measuring mode
5. SETTING INTO OPERATION
1. Switch on the meter via the ON/OFF button.
2. An indication is displayed. If not, either connect an AC adapter to the 6V DC input socket or insert a
battery. If the display indicates the battery symbol, the battery is exhausted and must be replaced.
3. For mounting the SLM-500 on a stand, the threaded jack (6.3 mm/1/4") can be used.
4. Always switch off the unit after operation to extend battery life. If the device will not be used for a longer
period of time, remove the battery in order to avoid battery leakage.
5.1 Inserting/Replacing the battery
If the SLM-500 is not used for a longer period (approx. 1-2 weeks), please remove the battery to prevent
damage in case of battery leakage.
■
Remove the compartment cover. When replacing discharged a battery, remove the old battery from the
battery compartment.
g
Reading over maximum range
h
Bargraph of the measuring value
i
Filter
j
Measuring unit
k
Measuring value
14/18
00033109.DOC, Version 1.0