Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g) Frost Protection Function
The frost protection function is only available if the room temperature controller is in
heating mode (see Chapter 11. c).
The room temperature controller keeps the temperature above +7 °C.
• Push the button "DAY" repeatedly until the wide black bar at the top of the display is below
the desired weekday (also see chapter 11. a).
• Briefly press the button "PROG" to terminate setting mode.
• Use the button "PROG#" to select the switching programme "PROG 0". The snowflake icon
"
" appears below the time display.
• To terminate this setting mode, briefly press "OK". The current time appears again in the
upper left of the display.
The setting mode is left automatically if no button is pushed for approx. 10 seconds.
Programming is assumed.
Observe chapter 11. f) for selecting or setting the switching programmes.
Caution, important!
After selecting the frost protection function (icon "
comfort or savings temperature cannot be set (see chapter 11. d).
If you want to set the temperature values for the comfort or savings temperature, first
select a different switching programme than "PROG 0"!
" and display "PROG 0"), the
45
Werbung
Kapitel
Inhaltsverzeichnis
