Werbung
Dial to the [UN-LOCK] position, which means it will not be locked/unlocked.
Dial to the [RS-LOCK] position, which means that only the small and large shuttle pulley buttons are locked, and the
main screen LCD displays a flashing "
Dial to [...LOCK], which means locking all the keys (do not lock the APP to enter the connection "
The main screen LCD displays the " ALL" flashing prompt with the "
locked.
12. Instructions on the running time setting method
In the time display state, press and hold the [TIME/SET] key for 2 seconds to start setting the running time/date. The
specific steps are as follows:
Step 1: Time display status
Step 2: Long press the [TIME/SET] key
Step 3: The hour numbers [
Step 4: Turn the large/small shuttle button [
Step 5: Tap the [TIME/SET] button
Step 6: The minute number [
Step 7: Turn the large/small shuttle button [
Step 8: Tap the [TIME/SET] button
Step 9: Year [
] flashes
Step 10: Turn the large/small shuttle button [
Step 11: Tap the [TIME/SET] button
Step 12: Month [
] flashes
Step 13: Turn the large/small shuttle button [
Step 14: Tap the [TIME/SET] key
Step 15: Date [
] flashes
Step 16: Rotate the large/small shuttle button [
Step 17: Tap the [TIME/SET] key to confirm
Note: MON (Monday); TUE (Tuesday); WED (Wednesday); THU (Thursday) TRI (Friday); SAT (Saturday); SUN (Sunday) As the date is
updated, the week will be automatically updated.
13. Instructions for setting the alarm time
According to the above 12-point operation introduction, after setting the current running time, in the time display state, press and hold
the [ALARM] button for 2 seconds to enter the setting of alarm clock ringing/automatic startup (two sets of alarm clock times can be
set).
The specific steps are as follows:
Step 1 : Time display status
Step 2 : Press and hold the [ALARM] key
Step 3: The characters [ALARM 1 ON] are displayed in the upper left corner of the main screen, and the number 1 is flashing
Rotate the large/small shuttle button [
Step 4: Press the [ALARM] key lightly
Step 5: The main screen displays ON/OFF flashing
Rotate the large/small shuttle button [
[ON] means choosing to turn on the alarm clock.
[OFF] means choosing to turn off the alarm clock.
" symbol.
] are flashing
] to adjust the hour
] is flashing
] to adjust the minutes
] to adjust the year
] to adjust the month
] to adjust the date
] to choose to set the first group of alarm clocks or the second group of alarm clocks
] to choose to turn on or turn off the alarm clock
" symbol. At this time, all keys have been
16
"operation).
Werbung
