Werbung
Verfügbare Sprachen
Verfügbare Sprachen
07
KEY CARD
PAIRING
A brand new eSchwalbe comes with one master key card (in
dark petrol colour) one secondary card (in light petrol colour)
and one NFC Tag. To pair the key cards / tag to the scooter
1
Start the scooter by pressing the Start/Stop button.
2
When in the screen appears the message "Start with
Keycard", put the master key card above the NFC card
receiver area until you unlock the scooter and can see the
main screen.
3
Press and hold the "Mode" button until the settings menu
appears.
4
Navigate through the menu using the push button "MODE"
on the handlebar to "Key Card Pairing". Press the "Horn"
button to enter.
5
Navigate to "pair new Key Card" and press the horn button
to enter.
2
6
Position the master key card in front of the NFC card
receiver area, until the message "Master Key Card is
identified" appears on the screen.
7
Position the new key card or tag in front of the NFC sign,
until the message "new Key Card Paired" appears on the
screen. Now this key card / tag is paired to the scooter.
EN
8
Exit the settings menu by navigating to "EXIT" and
pressing the horn button, until the main screen of the
cockpit is seen.
NOTES:
•
The sub-menu "identify Key Card" shows the serial number
of the key card when put above the NFC card receiver area.
The sub-menu "show paired Key Cards" presents a list of
•
the paired cards to this scooter. To erase a paired key card,
move to the desired card in the list, click the Horn button to
enter and confirm the deletion by entering the "Yes" option.
Up to nine key cards can be paired to one scooter.
The master key card should be used only to pair other
key cards and not for the everyday use. In case of loss of
the master key card please contact the nearest Govecs
shop or hotline (see the last page of this manual).
77
Werbung
