How to Store the Appliance
TIPS:
After usages, suggest to store your
appliance at safe places, away from hot or
wet area or fire.
1. Disconnect the appliance from main
power supply.
2. Empty the dust cup and clean the filters.
3. Store your appliance on wall mount and
make sure it stays firmly.
TECHNICAL SPECIFICATION
Product Name
CordlessVacuum cleaner
Model No
P9
Voltage
25.9V
Power
350W
Vacuum
30Kpa(max)
Charger input
100-240Vac 50/60Hz 0.4A
Charger output
30VDC 0.58A/0.6A
Dust capacity
600 ml
House material
ABS/PC
Product Size
1100x250x204mm
BATTERY REMOVAL AND DISPOSAL
Take your cordless vacuum cleaner at the end of the lifetime is not fit
in the trash as it fitted with a Li-ion battery, it needs to be disposed in
an environmentally friendly way.
Discarded batteries are non-environmentally friendly and disposed of
it in accordance with applicable regulations.
Discharge the battery by running the appliance to stop the engine
at idle.
Remove the battery pack from the appliance.
Dispose of the battery to a collection of chemical waste.
10
TROUBLE SHOOTING
SYMPTOM
ROOT CAUSE
Floor brush doesn't
1. The brush is wrapped
work
with long hair or other
long fabrics stuff.
2. The roller doesn't
put into position nor
assembly correctly.
Motor doesn't work
1. Lower battery power.
2. Overheat due to long
time of operation.
Suction gets weak
1. Filters are blocked by
dust
2. Air channel in floor
brush is blocked or the
roller is snapped.
3. The preliminary
filter/metal mesh is
blocked by paper chips
or plush fiber.
4. Air channel between
dust cup and main
appliance is blocked.
Charging indicator
1. Charger is not well
doesn't work nor blink
connected.
2. Battery is overheated.
WARRANTY INFORMATION
The warranty will not apply in cases of:The manufacturer provides
warranty in accordance with the legislation of the customer's own
country of residence, within 1 year, starting from the date on which
the appliance is sold to the end user. The warranty only covers defects
in material or workmanship. The repairs under warranty may only be
carried out by an authorized service centre. When making a claim
under the warranty, the original bill of purchase (with purchase date)
must be submitted.
SOLUTION
1. Clean up the
obstacle.
2. Reassembly the roller
in correct way
1. Charge the appliance.
2. Restart the appliance
after cooling down.
1.Clean or replace
filters.
2.Clean up the obstacle.
3.Check and clean the
preliminary filter/metal
mesh frequently.
4.Clean up the obstacle.
1.Check the charger if it
is well connected to
main power supply.
2.Try to recharge after
cooling down
11