Redkey P9 Bedienungsanleitung Seite 4

Operating the Cordless Vacuum Cleaner
Before first time use, ensure the vacuum cleaner has been charged
4-4.5hours. Turn on the Cordless vacuum cleaner by pressing the
ON/OFF button.
NOTES: Battery indicator light represents battery capacity and
will illuminate during use.
WARNINGS: Do not use the Cordless Vacuum cleaner without
the removable filter nor dust bin present.
How to Charge the Product
a
Charge Port
1.Turn off the Cordless vacuum cleaner.
2.Connect the adapter to the charging port on the main unit(a) or
either you may charge battery pack individually(b)
04
Charging Indicator
Charging Indicator
b
3.Plug the adapter into the main power supply at either way At
mode(a), the battery indicator will flash. Once the battery fully
charged, the battery indicator lights will stay on. At mode(b), the
battery indicator will flash with red light. Once the battery fully
charged, the battery indicator will stay on with green light.
WARNING:
Do not use any mains power adaptor other than
that supplied, as using an alternative will increase the risk of injury
and/or damage to main product.
How to operate the Product
TIPS:
The appliance provides two speed option to enable multi
cleaning. Suggest to use maximum power for massive dust or
studied stains and use minimum power for fine dust or relative
clean surfaces.
1. Power/Charge indicator
a) During working process, the light gives the indication of power level
remained. 4 lights on when full charged and gradually reduce to 3
lights, 2 lights and 1 lights with ongoing power consumption.
b) During charging process, the light gives the indication of charging
level. 1 light starts blink and stays on when it is well charged, then 2nd
light, 3rd light and all 4 lights stay on when it is fully charged.
2. Roller Snap, the appliance will give warning when the floor brush is
snapped or blocked by particle and the floor brush will stop after few
seconds. Stop the appliance immediately and restart the appliance
after blockage is removed.
3. Power level indication, the light for select level will be on when it is
selected.
05