Blaupunkt Lavender 1224 Bedienungsanleitung Seite 9

CLEANING PRE-FILTER (See Figure 3)
1. Turn off and unplug the unit.
2. Press the Lock & Release Button and remove the Rear Cover from the unit.
3. Remove the pre-filter from the HEPA Filter. Clean the pre-filter with vacuum
brush attachment of your vacuum cleaner. This will remove lint and dirt from
the filter.
4. After cleaning, reattach the pre-filter to the HEPA Filter and install the rear
cover back to unit and securely latch in place.
5. To ensure optimal performance, clean the pre-filter often.
REMOVING/INSTALLING UV LAMP (See Figure 4)
1. To access the UV lamp, remove the rear cover and HEPA filter
HEPA filter, use a screwdriver to remove the two screws holding the UV shield
and remove the UV shield.
2. To remove the UV lamp, rotate it 1/4 turn and then slide it out of the lamp
socket.
3. To install the UV lamp, slide it into the lamp sockets and rotate it 1/4 turn.
4. The UV lamp should be replaced once a year.
www.blaupunkt.com
Figure 3
8
LV 1224
. After removing