CFH LD 221 Bedienungsanleitung Seite 178

TAKE NOTE!
The flux is either embedded in the solder or applied separately .
When purchasing, you should enquire about the type of application
and the appropriate solder .
Maintaining and cleaning
WARNING! RISK OF INJURY! Disconnect the
power cord from the power outlet and wait for the
device to cool down before you attempt to work on
the device .
• Clean the device after you finish your work .
• To clean the housing, use a cloth and a mild detergent (if
necessary) .
• Never use sharp objects, petrol, solvents or cleaning agents that
can damage plastic .
• Do not allow liquids to get inside the device .
TAKE NOTE!
Spare parts (i .e . soldering tips) can be ordered from our service
hotline .
178
GB