Sensor Settings; Technical Data - Heitronic Pronto Installations- Und Bedienungsanweisung

. Sensor settings


Setting the detection range
The detection range of the sensor can be adjusted to suit individual requirements. By setting the DIP
switches, the range can be reduced from 100% to 75%, 50% and 25%.

Adjusting the lighting time
The luminaire can be set so that when triggered by the microwave sensor, the lighting time is fixed from
5 s to 30 s, 60 s to 300 s.

Setting the daylight sensor
The selected threshold value for light sensitivity can be deactivated or set to 2 lux, to 10 lux or even to 50
lux. In the "deactivated" setting, the light also comes on in daylight.
. Malfunctions
Luminaire does not switch on

Light switched on at the switch?

Check the connected lines

. Technical data

Article Type
500639 Ø 330 mm
500641 330 mm * 330 mm
These products contain a light source of energy efficiency class D
. Care

First disconnect the entire product from the power supply and allow it to cool down before carrying out
any cleaning or maintenance work on the product.

Clean the product regularly - only with a slightly damp, soft and lint-free cloth.
. Disposal

Waste electronic equipment must be taken to public collection points and must not be disposed of as
household waste.
LDBS Lichtdienst GmbH, Chemnitzer Straße 8, 14612 Falkensee, www.heitronic.de
Connection
230 V ~, 50 Hz 24 W, 2160 lm, 3000 K
230 V ~, 50 Hz 24 W, 2160 lm, 3000 K
Protection
LED
Type
IP 54
IP 54
Protection
Class
II
II
4 / 8 02/24