Flashlight Mode
Press the button once to turn on the ambient light.
x1
Hold the button for 2 seconds to turn on SOS mode.
2S
Trouble Shooting
Resetting Your Power Station
x1
Reset
If your Power Station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory
reset. If the Power Station still doesn't work, please contact support@anker.com.
05
FAQ
Q1: What's the max power output of the AC port?
300W, and if you use the AC port for devices greater than 300W, the product will automatically turn off.
Q2: Can I recharge the product while charging connected devices?
Yes.
Q3: Can this product power a CPAP?
Yes, but do not forget to turn off the Power Saving Mode first.
Q4: Will this product lose power automatically if not powered off?
Yes, when the car socket or AC control button is turned on, even if no devices are being charged, there will still
be a certain amount of no-load power consumption. To avoid draining the battery, we recommend keeping Power
Saving Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.
Q5: What kind of solar charger can charge this product?
Any 11V-28V solar charger with a DC 8mm (DC 7909) male connector.
SOS
Specifications
Cell Capacity
320 Wh
DC Input
11-28V
Car Charger Output
12V
10A
AC Output
230V~,1.3A Max, 50Hz, 300W Max
USB-A Output
5V
2.4A (12W Max)
USB-C 1 Input
5V
3A/ 9V
USB-C 1 Output
5V
3A/ 9V
USB-C 2 Output
5V
3A/ 9V
Discharging Temperature
-4°F-104°F / -20°C-40°C
Charging Temperature
32°F-104°F / 0°C-40°C
Size
21.6*21.14*14.4cm/ 8.5*8.32*5.67inches
Net Weight
3.9kg/8.6lbs
9A (100W Max)
3A/ 15V
3A/20V
3A (60W Max)
3A/ 15V
3A/20V
3A (60W Max)
2.25A (20W Max)
06