Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Skilled person safety information
WARNING. These instructions should only be followed by a skilled person.
Label
User and installation safety information
•
Inspect the ActivPanel for any physical damage to the casing before use. If damage is apparent, take care to avoid contact
with any potentially live parts.
•
Do not under any circumstances try to gain access to internal parts of the ActivPanel. If you suspect that the device is
damaged or faulty, you should contact Technical Customer Support, or an authorised Promethean service agent for advice.
•
Always use accessories recommended by Promethean to ensure compatibility.
•
Only use the power cable that is compatible with your mains outlet socket. If you are unsure of the electrical compatibility of
your equipment, please contact Promethean or an authorised Promethean service agent before attempting to connect the
device to the mains supply.
•
Use a wall socket that is close to the ActivPanel and that is easily accessible.
•
Firmly insert the power plug into the wall socket. Partial connection could cause sparks.
•
To avoid the risk of electric shock or component damage, disconnect the ActivPanel from the power supply before plugging in
any other cables.
•
Hold the power plug when unplugging the device. Pulling the power cable may damage the wires inside the cable and cause
fire or electric shock.
•
To avoid the risk of electric shock, do not touch the power plug with wet hands.
•
Unplug the power plug before cleaning the ActivPanel.
•
Do not use any liquid or spray cleaner when wiping the device. We recommend mixing a solution of 50% isopropanol and
50% water in a spray bottle, and spraying this onto a micro-fibre or 100% cotton cloth. Wipe the glass surface gently; do not
4
Description
• The cover on which this label is attached must only be removed by a skilled person.
• Removing the cover exposes areas that contain dangerous voltages that pose a risk to
life, and high temperatures that may cause painful injury.
• Power to the panel must be removed for at least 80 minutes before removing the rear
cover.
80
Warning of electric shock and high temperatures in this area.
Warning of electric shock in this area.
ActivPanel Cobalt Safety Guide
Werbung
