Remote Control; Battery Installation - Soundmaster Pdb1850 Bedienungsanleitung

INSTALL THE BRACKET ON THE CAR HEADREST
1 Install the bracket on the screw hole on the back of
the DVD player
2 Loosen the screws on the side of the bracket and
fasten the bracket to the two pillars under the
headrest.
3 Adjust the machine angle if required
1 On / Standby
2 Volume down
3 Selection/Enter frame-by -frame
To select press ; ; ◄; ►; and press OK
Frame forward/backward in pause press ◄ / ►
4 SETUP open setup menu (except in AV mode)
5 AUDIO switching left right channel
6 Play or pause in audio or video playback
7 Stop audio, video or photo playback
8 A-B set point A and B for loop playback
9 ZOOM press repeatedly for 2x, 3x, 4x, 1/2, 1/3
zoom
10 REPEAT repeat the loaded disc
11
SUBTITLE enable subtitle
12 USB/CARD selection of DVD; USB and card mode
13 Mute the sound
14 Volume up
15 MENU open the main menu of DVD
16
Fast for-/backward
17
Play previous next chapter/title/track
18 SLOW press repeatedly for 1/2, 1/4; 1/8 or 1/16
playback
19 DISPLAY turn on or off the main LCD screen
1. Remove the battery compartment cover on the back side of the remote control.
2. Insert two AAA batteries with the correct polarity into the battery compartment (see
illustration in the battery compartment).
3. Close the battery cover again.

REMOTE CONTROL

BATTERY INSTALLATION

2
PDB1850 / English Instruction Manual