Safety Instructions - Panther Fluid Head T 10 Betriebsanleitung

Manual | English
1. Introduction
Congratulations on your decision to buy or rent a PANTHER Fluid Head – T 10. We are very pleased
that you have chosen our product.
High-quality material and know-how, as well as a clever concept enable your PANTHER Fluid Head -
T 10 to do a professional job, which you will really enjoy when working.
Your new PANTHER Fluid Head - T 10 is a high-quality tool which enables the creative camera man
to do an excellent job – fast and easy – with fantastic shots and camera moves.
The PANTHER Fluid Head - T 10 is a product that was created and built by experts for experts – to
satisfy the high demands of every camera operator
We hope that you will have a lot of pleasure with your PANTHER Fluid Head - T 10. In order to guar-
antee the highest security and reliability of our product on the set, please study our operating man-
ual very carefully!
All the best
Panther GmbH
2.

Safety instructions

When placing the camera plate, make sure to keep your fingers out of the range of the lock-
ing lever, since it will snap back.
When the camera is mounted, the clamping screw of the fluid head may only be released if
camera and tripod are secured against falling over.
When releasing the vertical brake or the clamping for the balance plate, ensure that the cam-
era is secured against any sudden movement.
When switching off the counterbalance spring, ensure that the camera is secured against any
sudden movement.
Before transport, reset fluid damping to "0", release both breaks and switch on all counter-
balance springs.
1 / 12