Yolco RL80D Bedienungsanleitung Seite 17

5. Directions for use cont.
Installation requirements
Carefully!
The device has sharp edges. It is recommended to use protective gloves during installation.
The device should not be moved over surfaces susceptible to damage and scratches.
• Fix the device in accordance with the installation instructions to avoid the risk of its instability.
• The electrical socket must be easily accessible so that the device can be quickly disconnected from the power supply in the event of an emergency.
• The electrical socket must be located outside the area corresponding to the back of the device.
• The device should be installed in a recess with dimensions no smaller than those shown below. Make sure there is enough space for the door to open and close freely
880
mm
• The installation site should be strong enough and properly leveled.
• The place should not be exposed to sunlight or other sources of heat.
• When installed in vehicles, the doors of the device should not face the direction of travel.
550
mm
506
mm
830
mm
500
mm
364
mm
200
mm
394
mm
285
144 mm
mm
365
mm
100
mm
345
mm
130
110
mm
mm
456
mm
Mounting holes
75
mm 50
mm
144
mm
390
mm
285
mm
103
mm