MBNLED RGB DMX Controller Bedienungsanleitung Seite 10

SLIDER ORDER
There are 3 sliders and one fixture can have up to 24 channels, but all channels can be modified by
sliders. The solution is the 8 buttons below the display. Each button is assigned to 3 sliders: 8 buttons
x 3 sliders = 24 channels.
UP/DOWN - channel, button or slider selection
ENTER - go to next parameter setting
ESC - back to fixture selection
Buttons can be selected from 1 to 8 and sliders from 1 to 3. The channel can be selected from 1 to
the maximum channel number.
GRAND MASTER
Each channel can be configured for the grand master slider.
UP/DOWN - select channels or master selecting/deselecting
ENTER - go to next parameter setting
ESC - back to fixture selection
BLACK OUT
Each channel can be set to a different black out value. The black out value will appear on the output
until the black out effect is active.
UP/DOWN - channel selection or setting black out active
1 - delete active Black-out value
ENTER - go to next parameter setting
ESC - back to fixture selection
MINIMUM VALUE
For each channel a minimum value can be set. The channel value will never get lower as this
minimum value.
UP/DOWN - channel selection or minimum channel value setting
ENTER - go to next parameter setting
ESC - back to fixture selection
MAXIMUM VALUE
For each channel a maximum value can be set. The channel value will never have higher as this
maximal value.
UP/DOWN - channel selection or maximum channel value setting
ENTER - go to next parameter setting
ESC - back to fixture selection
www.mbnled.com
MBNLED RGB DMX Controller
10 info@mbnled.com