Hama SMART HUB Bedienungsanleitung Seite 10

• Scan the QR code on your item:
Once the QR code has been recognised, the setup of your item begins.
For this, you must confirm the network data of your 2.4 GHz network.
The setup process can take up to 3 minutes.
Once setup is complete, you can customise the name of your item or finish the setup process.
Note: Pairing restart
Press the Reset button, as described in Point 1.1, until the two lights on the front of the smart hub start
to flash. You can now start a further pairing attempt.
8
INSTALLATIoN