Herunterladen Diese Seite drucken

iRobot Roomba ADE-N2 Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result
EN
in property damage.
GENERAL
WARNING
• This product is not a toy. Small children and pets should be supervised
when the product is operating.
• Do not sit or stand on this product.
• Do not use unauthorised chargers. Use of an unauthorised charger
could cause the battery to generate heat, smoke, catch fire, or explode.
• This product comes with a region approved power supply cord and is
designed to be plugged into a standard household AC power outlet
only. Do not use any other power supply cord. For replacement cords,
please contact Customer Care to ensure proper selection of country
specific power supply cord.
• Do not disassemble or open the dirt disposal unless instructed to do so.
There are no user serviceable parts inside. Refer servicing to qualified
service personnel.
• Risk of electric shock, use indoors in dry location only.
• Do not handle your robot or charging station with wet hands.
• Be aware that floors may be slippery after wet cleaning with your robot.
• If the room to be cleaned contains a balcony, a physical barrier should
be used to prevent access to the balcony and ensure safe operation.
• Store and operate your robot in room-temperature environments only.
• If the room to be cleaned contains equipment, such as a stove, fan,
portable heater, or humidifier, remove the equipment before operation.
There is a risk of injury, accident or malfunction if the robot comes in
contact with and pushes the equipment.
CAUTION
• Do not operate the robot in areas with exposed electrical sockets or gas
shut-off valves in the floor.
• If the device passes over a power cord and drags it, there is a chance
that an object could be pulled off a table or shelf. Before using this
device, pick up objects like clothing, loose papers, pull cords for blinds
or curtains, power cords and any fragile objects.
• Be aware that the robot moves on its own. Take care when walking in the
area that the robot is operating in to avoid stepping on it.
• Do not use this device to pick up sharp objects, glass, or anything that is
burning or smoking.
• Perform the required maintenance as per the Owner's Guide to ensure
safe operation of the robot and charging station.
• Do not flip the robot over with the Combo Bin installed.
• Do not use this device to pick up sharp objects, glass, or anything that is
burning or smoking.
• Perform the required maintenance as per the Owner's Guide to ensure
safe operation of the robot and charging station.
• If the robot is operating on a floor with stairs, please remove any clutter
from the top step.
NOTICE
• Do not allow your robot or charging station to become wet.
• Do not place anything on top of your robot.
• The failure to maintain cleanliness of charger contacts could result in
loss of ability for the robot to charge the battery.
• Do not allow your robot or charging station to become wet. Before running
your robot on hard floors, please test your robot on a small section of the
hard floor to ensure that it is compatible. Using your robot on a hard floor
that is not compatible could result in damage to your floor. Contact your
hard floor manufacturer with questions on compatibility.
• Before running your robot on carpets or rugs, ensure that the carpets or
rugs are compatible with the dual multi-surface rubber brushes on your
robot, otherwise known as beater bars. Using your robot on a carpet or
rug that is not compatible could result in damage to your carpet or rug.
Contact your carpet or rug manufacturer with questions on compatibility.
AUTOMATIC DIRT DISPOSAL
WARNING
• To reduce the risk of electric shock, unplug your dirt disposal before
cleaning.

Werbung

loading

Diese Anleitung auch für:

Roomba rvb-y2Roomba abl-d1Roomba abl-d1a