Using The Air Compressor - Ronix Rc-5010 Bedienungsanleitung

position to power the compressor on.
2) To turn the air compressor off, push the power switch to the OFF position.
NOTE:
When the compressor is in the ON position, the air compressor will
automatically turn back on when the designated tank air pressure limit.
It will also shut off again when the desired limit. It will also shut off again
when the desired pressure is reached.
WARNING!
Never exceed the air tool's pressure rating as recommended by
the manufacturer. When using this air compressor as an inflation
device, always follow the maximum inflation guidelines stated by the
manufacturer of the item being inflated.
WARNING!
Always ensure the switch is in the OFF (O) position and the regulator
pressure gauge reads zero before changing air outlet. Failure to do so
could result in possible serious personal injury.

USING THE AIR COMPRESSOR

1) Ensure power switch is in OFF (O) position and air compressor is unplugged.
2) If not already installed, attach hose to compressor
3) Attach 6.35 mm (1/4 in.) NPT quick connect air fitting to accessory or
29
User Manual