Ronix RC-5010 Bedienungsanleitung Seite 26

corrosion on the inside of tanks.
- Risk of fire or explosion. Do not spray flammable liquid in a confined
area must be well ventilated Do not smoke while spraying or spray where
spark or flame is present. Keep compressors as far from the sparing
arras as possible, at least 4.5M (15 feet) from the spraying area and all
explosive vapors.
- Risk of bursting. Do not adjust regulator to result in output pressure
greater than marked maximum pressure of attachment. Do not use at
pressure greater than 10 bar.
- If connected to a circuit protected by fuses, use time delay fuses with
this product.
- To reduce the risk of electric shock, do not expose to rain. Store indoors.
- Inspect tanks yearly for rust, pin holes, or other imperfections that
could cause it to become unsafe.
- Never weld or drill holes in the air tanks.
- Make sure the hose is free of obstructions or sangers.
- Entangled or snarled hoses can cause loss of balance or footing and
may become damaged.
- Use the air compressor only for its intended use. Do not alter or modify
the unit from the original design or function.
- Always be aware that misuse and improper handling of this product
can cause injury to yourself and others.
- Never leave a tool unattended with the air hose attached.
- Never point any air tool toward yourself or others.
- Do not operate this air compressor if it does not contain a legible
warning label.
- Do not continue to use a tool or hose that leaks air or does not function properly.
- Always disconnect the air supply and power supply before making
adjustments, servicing a product, or when a product is not in use.
- Your tool may require more air consumption than this air compressor
is capable providing.
- Always follow all safety rules recommended by the manufacturer
of your air tool, in addition to all safety rules for the air compressor.
24
Air Compressor 50L