Break In Period - Ronix Rc-5010 Bedienungsanleitung

TO ADD OIL
1) Unscrew the cap of oil fill hole.
2) Using a funnel, carefully pour oil into the oil fill hole.
3) Tighten the cap securely into the oil fill hole.
NOTE:
Avoid too much oil. Ensure that the level of the oil does not exceed the
top of red dot at sight glass.
APPLICATIONS
Air compressors are utilized in a variety of air variety of air system
applications. Match hoses, connectors, air tools, and accessories to the
capabilities of the air compressor.
You may use this product for the purposes listed below:
- Operating some air powered tools
- Operating air accessories such as air nozzles and tire inflators.
TO MOVE THE AIR COMPRESSOR
Ensure the air compressor is unplugged, make sure the power cord is
secured in the cord warp.
1) Facing the back of the air compressor, grasp the handle firmly with
two hands.
2) Life the air compressor toward you until it balances on the wheels.
3) Push the unit along to the desired location.
Lower their air compressor unit it sits securely on a flat surface.

BREAK IN PERIOD

Before first use, run the air compressor at zero tank pressure with the
drain valves fully open for 30minutes.
TURNING THE AIR COMPRESSOR ON/OFF
1) With the air compressor plugged in, pull the power switch to the ON
28
Air Compressor 50L