Steam Tank; Guarantee & Service - Philips GC6360 Bedienungsanleitung

1 Clean the iron with a damp cloth.
 Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive
(liquid) cleaner.

steam tank

Let the appliance cool down sufficiently before you remove the steam tank cap.
Rinse the steam tank once a month or after you have used the appliance approximately 10 times.
1 Carefully remove the steam tank cap (Fig. 1).
 Rinse the steam tank with 500ml of fresh water. Then hold the steam tank upside down over
the sink to pour out the water (Fig. 1).
 Screw the cap back onto the steam tank.
storage
Make sure the iron has cooled down sufficiently before you put it away.
1 Remove the mains plug from the wall socket and let the appliance cool down.
 Empty the steam tank.
 Regularly check if the mains cord and the supply hose are still undamaged and safe.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
,
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 1).
Guarantee & service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal
Care BV.
Troubleshooting
This chapter summarises the most common problems you could encounter with your iron. Please
read the different sections for more details. If you are unable to solve the problem, please contact
the Philips Customer Care Centre in your country.
Problem
The appliance
does not become
hot.
Cause
There is a connection problem.
The steam tank is not switched on.
The selected temperature is too low.
The iron has not been switched on.
EnGlish
Solution
Check the mains cord, the plug
and the wall socket.
Make sure the steam tank switch
is set to 'on'.
Select a higher temperature.
Make sure the iron switch is set
to 'on'.
11