milerd DETOXER Bedienungsanleitung Seite 4

PRINCIPLE OF OPERATION
1. Fill a deep container with water
and place the products to be treated.
Not recommended for use with
plastic dishes!
2
3. Submerge the appliance in the water
containing food. Make sure that the water
level does not exceed the mark
the body of the device. The water level
indicator should show a blue light
Drain off some of the water if necessary.
4
5. After cleaning is complete, put the
appliance aside, drain the water and
rinse the food.
3
1
2. Turn on DETOXER and set the required
treating settings (see the CONTROL section).
Do not start the treatment process if the
device is not submerged in water!
3
on
MAX
.
4. Press the START button and wait for
the appliance to clean the food.
5