Inserting Screw Autofeed - Prefa La45250M2-Re-Hafte Originalbetriebsanleitung

5.3

InsertInG screW aUtOFeeD

¬ Insert the autofeed strip into the guide at the top.
abbildung/Illustration 10 · Inserting screw autofeed – Step 1
54
OPeratIOn
PRODUCT INFORMATION
¬ Slide the autofeed strip through the guide, and then through the autofeed
attachment.
CAUTION! THE FIRST SCREW MUST BE IN THE BARREL.
¬ Push the autofeed strip so far into the guide that the first screw is already
under the bit.
¬ The feed of the autofeed belt occurs during the return stroke!
abbildung/Illustration 11 · Inserting screw autofeed – Step 2
EN
55
OPeratIOn