Specifications; Package Content; Charging Instructions - i-tec CHARGER5P40W Gebrauchsanweisung

i-tec USB Smart Charger 40W / 8A
INTRODUCTION
With this adapter you can charge up to 5 USB devices simultaneously. Outputs 5x USB
DC 5V / max. 2.4A allow wide use in homes, commercial centers and offices. You can
charge cell phones, tablets, MP3 / MP4, powerbanks, PDA, cameras and other digital
devices. Input AC 100-240 V allows worldwide use.

SPECIFICATIONS

Input: AC 100-240V / 50-60Hz
Ÿ
Output: 5x A-Type USB DC 5V / max. 2.4A; total output max. DC 5V / 8A
Ÿ
Compatible charging devices – devices which need power supply to the DC 5V /
Ÿ
max. 2.4A, e.g. cell phones, tablets, MP3 / MP4, powerbanks, PDA, cameras and
other digital devices
Size 97 x 60 x 27 mm
Ÿ
Weight 163 g
Ÿ

PACKAGE CONTENT

i-tec USB Smart Charger 5 Port 40W / 8A
Ÿ
AC Power Cable (120 cm)
Ÿ
User's Manual
Ÿ

CHARGING INSTRUCTIONS

Connect the adapter to power socket using the included AC power cable (make
Ÿ
sure to tip is correctly inserted in the adapter) and via outputs 5x USB DC 5V /
max. 2.4A you can connect various digital devices.
All outputs are designed for charging cell phones, tablets, MP3 players, etc.
Ÿ
iPad and Samsung Tab can be charged on any port.
Ÿ
With the "smart" chip the ports are independent and it does not matter on which
Ÿ
port the device is connected.
It is possible to charge two iPad tablets or two Samsung tablets at the same time.
Ÿ
We recommend you to use original brand charging cables only. Charging might
Ÿ
not work if you use non-original cable.
Example: 2x iPad with max. current 2.4A per port + 3x phone / tablet with max.
Ÿ
current 1A per port. Total max. current is 7.8A.
CAUTIONS
The charger should be kept out of children's touch, children should use it only
Ÿ
under adults' supervision.
Don´t adjust the output switch of polarity manually, when the adapter is working.
Ÿ
EN
05