Optional Parts - Costway BB5605 Handbuch

OPTIONAL PARTS

G Wheel
CHANGING TABLE INSTALLATION STEPS
Step 1
Disassemble all components and place them on a soft level surface, such
as a carpet. First, place components A and B on the same plane, and
connect A1, A2 to B1, B2 respectively as shown in the picture. The other
side is connected in the same way.
04
H Storage Bag
Step 2
After the connection, the height of the diaper table to the ground can be
adjusted by adjusting the insertion depth of the buckle position of the
Support Stand(B), so as to obtain the suitable height for use.
Tips: 3 Adjustable Heights
Height 1 - The height of the table top from the ground is 89cm, suitable
for parents with a height of about 168cm to use.
Height 2 - The height of the table top from the ground is 86cm, suitable
for parents with a height of about 165cm to use.
Height 3 - The height of the table top from the ground is 83cm, suitable
for parents with a height of about 160cm to use.
EN
05