vlahova RB9370 Bedienungsanleitung Seite 16

(By keeping the "+" or "-" button pressed, could accelerate the process and reach the
desired value more quickly)
The setting sequence is shown as follow: RCC ON/OFF, Time Zone, 12/24 Hour, Hour,

Minute, Second, Year, Language, Month/Date Sequence, Month, Date.
There are 10 languages for day of week: German, English, French, Italian, Dutch, Spanish,

Danish, Czech, Polish, Swedish
Note:
All setting modes will automatically exit in 15 seconds without any adjustment

For Time Zone: Time Zone is used in countries which can receive the DCF frequency signal

but the time zone is different from Germany Time (i.e. GMT+1). When the country time is
faster than the German time for 1 hr, the zone should be set to 01. Then the clock will
automatically set 1 hour faster from the signal time received.
4.3 Daily Alarm Setting:
Hold "ALARM SET" button 2 seconds, alarm time flashes, press "+" or "-" button to

adjust the alarm time. Press "ALARM SET" button to confirm the setting
By keeping the "+" or "-" button pressed, could accelerate the process and reach the
desired value more quickly
4.4 Snooze Alarm Function:
Pop up "ALARM ON/OFF" button (B1) to activate alarm function, press down "ALARM

ON/OFF" button (B1) to deactivate alarm function.
Alarm time and alarm icon"

Except "SNOOZE" button, press any button to stop the alarm when alarm alerts.

Otherwise, the alarm signal sounds for about 3 minutes, then stops automatically
Press "SNOOZE/LIGHT" button when alarm alerts. "

snoozes for around 5 minutes, then it alerts again. The snooze function can be enabled
for maximum 7 times.
5. Thermometer
Press "+" button to switch temperature unit.

If the temperature is out of the measurable range, LL.L (beyond the minimum

temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD.
6. Backlight
" appear on the display if alarm function is activated.
" flashes on the LCD. The alarm
16