Radio Controlled Clock; Manual Time Setting - Vlahova Rb9370 Bedienungsanleitung

3. Getting Started:
Open battery Cover (C1)

Insert 2 pieces AAA size batteries observing polarity [" +" and " –" marks]

Replace battery compartment cover

The unit can be placed onto any flat surface; the unit is ready for use now.

4. Time and Alarm Setting

4.1 Radio Controlled Clock:

After the start-up of the unit, the clock automatically starts to scan the DCF time signal.

Radio Control Icon "
flashes,
Indicating now is receiving
DCF signal
The clock automatically synchronized with the DCF radio signal every day at 3.00 am to

maintain accurate time keeping. If synchronization with the DCF radio signal fails, "
on LCD disappear.
The clock can be set to scan the radio signal manually by holding "-" button for 2

seconds. Each reception takes around several minutes. If receptions fail, scanning stops
(" " on LCD disappear).
Stop scanning DCF radio signal manually by holding "-" button for 2 seconds.

"DST" shown on the LCD if it is in Daylight Saving Time Mode


4.2 Manual Time Setting:

In time display mode, press "TIME SET" button to view the year. Hold "TIME SET" button

for 3 seconds to enter Clock/Calendar setting modes.
Press "+" or "-" button to adjust the setting and press "TIME SET" button to confirm each

setting.
" flashes on LCD.
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
"
15