Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: check the plus/minus poles of
the batteries and insert them correct-
ly. The batteries must be completely
inside the battery holder.
Use
Tyre pressure gauge
• To switch the product on, press the
ON/AUTO-OFF button (1d).
• Press the ON/AUTO-OFF repeat-
edly to select different measurement
unit, e.g. psi, bar, kPA, kg/cm².
• Place the measuring nozzle (1a)
on the tyre valve and push in to
measure the tyre pressure.
• The LED light (1b) can be used to
help locate tyre valves in the dark.
• Read the measured tyre pressure
from the LC display (1c) of the
product.
• To switch the product off, hold the
ON/AUTO-OFF button.
Note: the product turns off automati-
cally after approx. 30 seconds when it
is longer being used.
Seatbelt cutter
• Use the seatbelt cutter (1e) to free
yourself in an emergency.
Emergency hammer
• Use the emergency hammer (1f)
to break the car window in an
emergency.
Note: this product is only suitable for
prestressed vehicle windows and not
for laminated windows.
Tyre tread depth gauge
• Insert the tyre tread depth gauge
(1g) in the tread rib to measure the
tread depth.
Note: refer to the following
guidelines:
• blue area (4 to 19mm)*: suitable
for safe driving
• yellow area (2 to 4mm)*: change
tyre soon
• red area (0 to 2mm)*: change tyre
immediately
* The legally required tyre tread
depth for vehicles in the United
Kingdom and the EU is 1.6mm in the
middle of the running surface (approx.
three quarters of the tread width).
Refer to the legal requirements in your
country.
Storage, cleaning
When not in use, always store the
product dry, clean, without batteries
and at room temperature. Wipe clean
with a dry cloth only.
IMPORTANT! Never clean the prod-
uct with harsh cleaning agents.
GB
7
Werbung
