Kemper CleanAirTower Betriebsanleitung Seite 90

NOTE
If the fault cannot be corrected by the customer, please contact the
manufacturer's service department.
7.4 Emergency measures
In case of fire of the product or its detection elements, the following steps
should be taken if necessary:
1. Disconnect the product from the mains! If present; pull out mains plug;
set main switch to 0-position; disconnect supply fuses.
2. If present, disconnect the compressed air supply.
3. Fight fire with a commercially available dry powder extinguisher.
4. Notify local fire brigade if necessary.
WARNING
Do not open products with maintenance door. Flash flame formation!
In the event of a fire, do not touch the product under any circumstances
without proper protective gloves. Risk of burns!
1502828-04 - 90 -
EN