SwitchBot Blind Tilt Benutzerhandbuch Seite 7

Step 2: Install onto your blinds
To ensure your Blind Tilt holds firmly on your blinds, use the wet wipe provided or neutral
detergent to clean the headrail and the blind wand. Dirt or dust will affect adhesion and
may cause dropping at a later time.
Use the measurement paper tape to determine an adapter for your blind
wand
1. Wrap the measurement paper tape around your blind wand and tuck the narrower
end of the paper tape into the gap on the other end. Slide the narrower end
through the gap so the paper tape tightly fits the wand. Now check which size the
marks on the paper indicate – S, M, L or XL.
7