Changing The Batteries - Protec .class PSZM Bedienungsanleitung

Operations

Changing the batteries

Minimize the risk of electric shock. Remove the clamping
jaws from the test circuit and switch off the meter before you
remove the rear housing.
Procedure
| If the battery voltage is too low, the
battery icon will appear on the
LCD screen. Replace the battery
when this icon appears.
| Set the range switch in the OFF po-
sition.
| Remove the rubber holster. Un-
screw the screw (A) on the rear
side with a screwdriver. Remove
the used batteries and replace with
two new 1.5-V button cell batteries
(type SR 44/LR 44).
| Screw on the battery cover and re-
place the rubber holster.
Do not dispose of batteries in normal household rubbish!
Use an authorised local collection point!
A
30