Nidec SHIMPO RK-3E Bedienungsanleitung Seite 7

Operation Starting and Stopping
・ Start
①
③
ＦＷＤ・・・Clock wise
ＲＥＶ・・・Counter clock wise
④
・ Stop
①
②
Operation Switching Directions
Never change wheelhead direction while wheelhead is moving.
①
②
Operation Warning
Step the pedal all the way back
before turning the power switch off.
Do not operate any switches
with wet hand.
②
Operation Power Switch
③
①
Maintainance
① Switch the on/off-breaker switch to
the off position (refer to diagram).
② Return the foot pedal to the off
position (refer to diagram).
③ Turn the power switch back on.
Mainteinance
Turn the power switch off and unplug
the power cable for cleaning, testing or
adjustment. (It is recomended to do the
same if the wheel will not be in use for a
long period.)
DO NOT POUR WATER ON THE
WHEEL TO CLEAN IT.
wheel down with a damp sponge or
cloth. (Splash pan can be saturated if it
is removed from the wheel.)
Foot Pedal Replacement
Using the wrench provided,loosen the
stopper bolt if the wheelhead does not strat
after replacing the foot pedal.
- 6 -
②
Stop
Wipe the