Monkey Banana Gibbon 5 Bedienungsanleitung Seite 22

gIbbOn SerIeS featUreS
[1] System
Designed as compact near field monitor it allows to work in a very narrow triangle sweet spot to compensate
the lack of space most users are facing.
This studio monitor is equipped with a nice silkdome tweeter to guarantee stress less mixing sessions over a
long period. Gibbon series speakers integrates a magnetically shielded polypropylene Cone for Low Frequency
Response.
The Gibbons are Bi-amped in Class A/B Design. HF as well as LF are supplied with Power from separate
Amplifiers customized to reach the maximum performance of the tweeter and woofer.
featUreS rear panel
1. Vent Port
2. XLR Input(+4dBu):This input accepts XLR type connectors. Connect your audio interface, mixer, or other
line-level audio source to this input.
3. 6,3 mmTRS Input(+4dBu):This input accepts TRS 6,3mm type connectors. Connect your audio interfa-
ce, mixer, or other line-level audio source to this input.
4. RCA Input (-10dBv):The RCA input accepts unbalanced signals used to connect signals from unbalan-
ced -10dB devices.
5. Volume Knob: This knob adjusts the gain level. When operating the unit for the first time, start with
the volume control set all the way off. Slowly raise the volume control to reach a comfortable listening
level.
6. HF Knob:10KHz +/-6dB adjustable.
7. LF Knob:100Hz +/-6dB adjustable.
8. Power Switch:This Switch powers on and off.
9. AC Inlet:This socket accepts a standard IEC-type power cable.
10. LED Logo : The Monkey Banan Logo will be lighted as soon a signal source is playing.
After 12 min without ( no signal is playing) the speaker turns into Standby Mode, the Logo will be
dimmed; the speaker is in "Jungle Protect" - according to [European Directive 2005/32/EG]. As soon
signal is played again the speaker turns immediately on, the Logo will be enlighted
11. AC Select: Ensure the voltage switch is in the right postition to deliver the voltage used in your country
22