Cleaning And Maintenance - Philips HD7753 Benutzerhandbuch

5.5 Drip stop function
The drip stop function enables you to remove
the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the
drip stop stops the flow of coffee into the jug.
Note:
D
The brewing process does not stop when you
remove the jug. If you do not put the jug back
in the appliance within 20 seconds, the filter
basket overflows.
6 Cleaning and
maintenance
6.1 Cleaning after every use
Warning:
B
Never immerse the appliance in water or any
other liquid, nor rinse it under the tap.
Remove the mains plug from the wall socket.
1
Wipe the outside of the coffeemaker with a
2
damp cloth.
Clean the filter basket with hot water and
3
some washing-up liquid.
6.2 Cleaning the coffee bean
chute
You have to clean the coffee bean chute every
1 to 2 weeks, depending on the frequency of use.
Put the mains plug in the wall socket.
1
Press the start/standby button (Fig. 2).
2
• The display lights up.
Press the start/standby button and then
3
remove the mains plug from the wall socket.
Insert the flat end of the cleaning brush
4
handle into the lock of the coffee bean
chute and turn the lock to the 'open'
position. (Fig. 28)
Open the lid of the coffee bean
5
chute (Fig. 29).
10
Use the cleaning brush to brush ground
6
coffee residues into the lower part of the
chute (Fig. 30).
Tip:
E
Place a paper filter in the filter basket to
collect the ground coffee.
• The ground coffee residues fall into the filter
basket.
Close the lid of the coffee bean chute and
7
turn the lock to the 'locked' position (Fig. 31).
Remove the paper filter with the ground
8
coffee residues and throw it away.
6.3 Cleaning the insulated jug
Warning:
B
Do not immerse the insulated jug in water
or any other liquid and do not clean it in the
dishwasher.
•
To remove the lid from the jug, turn it by its
lever to the 'remove lid' symbol. Then pull the
lid off the jug (Fig. 32).
• Clean the inside of the jug with a soft
brush, hot water and some washing-up
liquid (Fig. 33).
Tip:
E
To remove stubborn brown deposits, fill the
jug with hot water and add a spoonful of
sodium carbonate. Let the sodium carbonate
do its work for some time.
•
After cleaning, rinse the jug with fresh hot
water (Fig. 34).
•
To put the lid on the jug, insert the two
projections of the lid into the openings in the
rim of the jug. Then turn the lid to the right to
the 'closed/brewing' symbol. (Fig. 35)