Me VYSYS 1010 Montageanleitung Seite 36

7 Software Operation
GENERATE P2P ID
E
NOTE !
The precondition to generate P2P ID is that
make sure the NVR is connected with internet,
and IP address is available.
Click the mouse right button on the main
Step
interface >
setup. If user is familiar with LAN, then no
need to choose DHCP which help to get
IP address automatically. Manually input
IP address and DNS address, NVR will
generate ID by network, once generate,
it will appear in menu.
If user not familiar with LAN,or NVR is in
independent network,can choose DHCP
to get availableIP address.
After NVR gets IP address ,it will
generate P2P ID automatically.
36
ENGLISH
System setup > Network
VYSYS 1010
WIRELESS LCD NVR COMBO
ACCESS IN LAN
F
Click the mouse right button on the main
Schritt 1
interface > System setup
setup > check videorecorder IP address.
Access by computer in the same LAN,
Schritt 2
input NVR's IP address and prot (If prot
is 80, no need to input) in IE prowser or
any other browser. Then it will access
LAN log in webpage, input user name
and password, click login.
Once access successfully, can get video.
Schritt 3
Tipp ! Please make sure the NVR and
computer be working in the same
network segement.
G ACCESS IN WAN
Click the mouse right button on the main
Schritt 1
interface > System setup
setup > check video recorder IP address.
Access by computer in WAN, input
Schritt 2
www.ismartp2p.com in IE browser or
> Network
> Network