Software Operation - Me VYSYS 1010 Montageanleitung

7 Software Operation

A ADD CAMERA TO NVR
The included cameras in the kits have been
paired with NVR at the factory, no need
execute this operation.
If you want to add more cameras to NVR,
please operate follow below steps:
1
Connect a new IP camera to the NVR with
a network cable, then power supply for
both the IP camera and the NVR, wait for
about over 1 minute.
34
ENGLISH
DC 12V/1A
AC Wall Socket
RJ45 Cable
VYSYS 1010
WIRELESS LCD NVR COMBO
USB Mouse
2
Click the mouse right button on the main
interface > Click Video Manage
> select the camera in the search list
> Match code > ok.
3
After about 30 seconds the new camera
will be occurred in the "added device" list,
and status displays "Connect success".
DC 12V/2A
AC Wall Socket
> refresh