Me VYSYS 1010 Montageanleitung Seite 29

1
Plug in the included USB mouse to this connector.
2
Connect the output of the supplied 12V power adapter into the power socket on the NVR.
3
Plug the power adapter into the wall socket.
4
Connect the output of the supplied 12V power adapter into the power socket on the Camera.
5
Plug the power adapter into the wall socket.
NOTE !
Wait for a few minutes till the NVR and the IP cameras finished startup.
So far, the local surveillance system was done.
6
If you want to remote access this system with a smart phone or computer, you should
connect the NVR to your home wireless router with a RJ45 network cable and make sure
the router has been linked to internet.
ENGLISH
VYSYS 1010
WIRELESS LCD NVR COMBO
29