Fitting The Pedals; Fitting The Drive Unit - Coolproducts Rennrad Bedienungsanleitung

9

Fitting the pedals

If you position and screw in the pedals at an angle,
you might destroy the thread in the crank arm.
Danger!
If a pedal is screwed in incorrectly, it may shear and
drop off, whilst the child is riding the Rennrad.
1 Screw the pedal marked "R" into the right-hand crank
(on the chain wheel side) clockwise (right-hand
thread).
2 Screw the pedal marked "L" into the left-hand crank
anti-clockwise (left-hand thread).

10 Fitting the drive unit

Your Rennrad can quickly be turned from a running bike
into a „proper" bike with suitable tools and a little technical
skill. If you are not confident in completing this work,
contact a bicycle dealer.
Danger!
If the drive unit and chain guard are not fitted correctly
your child might fall off and/or get injured.
When the drive unit is fitted, the saddle can no longer
be moved to its lowest position.
64