Fitting The Fenders - Coolproducts Rennrad Bedienungsanleitung

2 Adjust the handlebar to the required height. The "min.
Insertion" mark on the tube must not be visible.
3 Align the handlebar so that it is perpendicular to the
front wheel.
4 Tighten the Allen bolt.
(Tightening torque 20–30 Nm)
5 Fit the safety pad.
Danger!
If the stem is not properly secured your child may fall
off and injure him /herself.
8

Fitting the fenders

The Rennrad comes with a set of fenders. The bolts
for the fenders are already fitted to the bike.
60