Coolproducts Rennrad Bedienungsanleitung Seite 58

2 M ove the handlebar to the required position.
The handlebar must be centred in the stem clamp.
3 Tighten the Allen bolt.
(Tightening torque 20–30 Nm)
Danger!
Always ensure that the handlebar is securely
fastened. A loose handlebar can cause the child to fall
off.
To adjust the handlebar height / stem clamp
The height of the handlebar is determined by the
insertion depth of the stem . Please note the minimum
insertion depth of the stem, which is marked by an
engraved line "min. Insertion" on the stem. The
„minimum insertion" line must not be visible.
1 Remove the safety pad from the handlebar and undo
the Allen bolt.
59