Hartan i-go Bedienungsanleitung Seite 5

Instructions for use
WARNING!
When folding and unfolding the stroller there is a risk of injuries
due to jamming. Take care that you keep your child's body parts at a safe
distance.
Assembly & Mounting
To open the stroller
Hold the handle and lift upwards until the chassis is fully extend ensuring
that it clicks in to the position. Extend the upper lock into the horizontal
position.
Front Wheel assembly
Insert the front wheel into the front leg until you hear a click sound. Repeat this
process for both swivel wheels.To lock the front swivel wheel, push red
lever (A) towards the inside. To unlock push the red lever (A) upwards in its
locking position (B).
Rear wheel assembly
Push the rear wheel assembly into the
rear wheel axle until you hear a click
sound.Ensure that it is engaged before
use.
Using the stroller
To use the stroller
Step down on the left brake pedal to
unlock the brakes. 1
Step down on the right brake pedal to
engage brake mechanism. 2
WARNING!
Make sure the brake
is always closed when parking the
carriage and when placing the baby in
it or taking it out. Do not park the
carriage on a hill or an inclined plane.
Canopy adjustment
1. Fix the attachment brackets of the canopy to the metal construction. 1
2. Fix the push button on either side of the hood to the handle bars of the
stroller 2
1
To use bumper/Safety bar
Mounting the bumper bar: slide bumper tips into the relative
Releasing the bumper bar: push the two buttons under the bumper bar while
pull it out.
To use safety belts
To use rotatable handles
Keep the red buttons pushed to rotate. You may use the buggy with one hand only,
when the handle is in the horizontal position.
Backrest adjustment:
The back rest is adjusted via the pull belt with clasp.To adjust the backrest, pull
the belt while holding the clasp to set the seat in sitting position.Pull the ring on
the clasp and pull the clasp down to release the seat to liying position
IMPORTANT:
angle.
Folding the stroller
IMPORTANT
removal or folding.
1. Push the button on the stabilizing tube ➀ between the handles and push it
down.
2. Pull both lock levers ➁ upward. At the same time push the handles forward
until the stroller is folded.
2
Support the back of the pushchair seat unit when adjusting the
: Always remove your child from the buggy prior to installation,
5