Herunterladen Diese Seite drucken

L&S POWER LINE Montageanleitung Seite 4

Vorschau ausblenden Andere Handbücher für POWER LINE:
Utilizzare i prefori per fissare le viti al ripiano.
Use the prefixes to secure the screws to the shelf.
Verwenden Sie die Präfixe, um die Schrauben am Regal
zu befestigen.
Utilisez les préfixes pour fixer les vis sur l'étagère.
Usa los prefijos para asegurar los tornillos a la
estantería.
INSTALLAZIONE / INSTALLATION / INSTALLATION / INSTALACIÓN / INSTALLATION
65mm 2,55''
2
4
030_FIS20A_ 81771240100
5
Vite opzionale consigliata.
Optional screw recommended.
Optionale Schraube empfohlen.
Vis facultative recommandée.
Se recomienda un tornillo opcional.
Max. 300mm 11,81''
Min. 150mm 5,90''
2
1
3
5
Abbassare il reggi ripiano e
stringere la vite con forza.
Lower the shelf support and
tighten the screw firmly.
Senken Sie die Regalboden-
träger ab und ziehen Sie die
Schraube fest an.
Abaissez le support de
l'étagère et serrez fermement
la vis.
Baje el soporte de la
estantería y apriete el tornillo
con firmeza.
3
1
Attenzione. Il connettore ha un verso solo.Non stringere la vite.
Careful. The connector has one verse.Don't tighten the screw.
Mensola in vetro.
Vorsichtig. Der Verbinder hat einen Vers.Ziehen Sie die Schraube nicht an.
Glass shelf.
Attention. Le connecteur a un verset.Ne serrez pas la vis.
Glasregal.
Cuidado. El conector tiene un verso.No aprietes el tornillo.
Etagère en verre.
Estante de cristal.
1
3
Collegare la lampada e infilare la mensola tra il ferma ripiano.
Connect the lamp and insert the shelf between the shelf stop.
Schließen Sie die Lampe an und setzen Sie das Regal
zwischen den Regalanschlag ein.
Branchez la lampe et insérez l'étagère entre les butées de
l'étagère.
Conecta la lámpara e inserta el estante entre el tope del
estante.
Abbassare il reggi ripiano e stringere la vite con forza.
Lower the shelf support and tighten the screw firmly.
Senken Sie die Regalbodenträger ab und ziehen Sie
die Schraube fest an.
Abaissez le support de l'étagère et serrez fermement la
vis.
Baje el soporte de la estantería y apriete el tornillo con
firmeza.
2
1
2
3
4
www.ls-light.com
4
6
3
C
4
loading