Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
R A D I A N T
O U T D O O R
H E A T E R S
Installation Requirements
®.
The ideal mounting position for the HEATSTRIP
Max is on the ceiling, directly above the area to be heated. If this is not
®.
possible, HEATSTRIP
Max can be mounted on a wall and angled downwards. In this situation, ensure the mounting
height is in the range of 2.4m to 3.0m and the table is within 3.0m of the wall.
For mounting heights more than 3.5m, we recommend the use of the optional accessories to reduce the height of the
®.
heater to 2.4m—3.5 m. This will increase the effectiveness of your HEATSTRIP
Refer to the Mounting Accessory section
for more information.
Electrical connections/GPO's should not be located at the back of the heater. They should be located outside the physical
footprint of the units to minimize heat build-up behind the units.
Incorrect Installation
Correct Installation
CEILING
CEILING
CEILING
The heating surface must never be directed toward the ceiling
8
Werbung
Inhaltsverzeichnis
