MTP-Racing SIXTY6 SIX008 Montageanleitung Seite 8

15. Fit the seat and screw it tight.
16. Apply threadlocker to the central screw and the
clamping screw of the licence plate holder and
tighten so that the angle can be adjusted.
17. Adjust the angle of the licence plate holder ac-
cording to legal requirements. (In Germany, angle
max. 30° inclined forwards, perpendicular to the
longitudinal centre plane of the vehicle).
18. Tighten the central screw of the licence plate
holder with 12 NM, tighten the clamping screw
with 7 NM.
MTP­Racing GmbH
Zornedinger Straße 19 • DE-85614 Kirchseeon OT Buch
mtp-racing.de • info@mtp-racing.de • Tel.: +49 8091 39925-00