Durable EFFECT Nutzungsinformation Seite 19

▶ see image 3
Risk of material damage due to incorrect cable routing!
• Incorrect routing of cables can cause damage to the cables or an electric short circuit.
The opening has a size of 50 × 16 mm. All larger plugs must be installed in this assem-
bly step.
– Route the monitor power cable as shown and insert the metal surface (2) into the slot cor-
responding to the desired mounting height.
▶ see image 4
– Set the felt side elements (3) upright.
▶ see image 5
To better identify the slots to be used for mounting on the outside, insert the mounting
clips (1) through the slots in the felt side elements (3) from the inside.
– Use the mounting clips (1) to fasten the side elements as shown.
Use
▶ see "Usage" from page 8
Risk of material damage due to incorrect use!
• Incorrect positioning can cause the monitor or laptop to fall, resulting in damage.
• Make sure that the monitor base or the laptop is securely positioned so it is in full contact
with the metal surface of the monitor stand.
Risk of material damage due to incorrect cable routing!
• Routing of cables under strain can damage the cables or cause the monitor or laptop to
fall.
• Always ensure strain-free routing of cables, using the cable ducts provided.
– Set the monitor stand upright and place your monitor or laptop on the stand as shown.
Disassembly
▶ see "Disassembly" on page 10
– If you wish to change the mounting height or dispose of the monitor stand, first disassem-
ble the stand as shown.
⚠ DANGER
ATTENTION
EN
English
19