Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DECLARATION OF A STANDARDS CONFORMITY
The producer confi rms that the devices agreee with 2009/142/ES standards, rule nr. 22/1997 Sb, Nr. 258/2000
Sb and with relevant goverments ordres. 38/2001 Sb.. Instalation must be done with respect to valid standards.
Attention, the producer refuses any responsibility in case of direct or indirect damages which are caused due to
wrong instalation, incorrect intervention or modifi cation, insuffi cient maintenance, incorrect use and also possibly
caused by other reasons presented by items in sale conditions. This appliance is set only for skilled use and
must be operated by qualifi ed persons only. Parts set and secured by the producer or accredited person must
not be rebuilt by user.
TECHNICAL DATA
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection and
all following information before instalation.
PRODUCT
VOLTAGE (V/HZ)
TYPE
E - 4
400 V, 3N, 50 Hz
E - 6
400 V, 3N, 50 Hz
E - 6 L
400 V, 3N, 50 Hz
E - 9
400 V, 3N, 50 HZ
E - 8
400 V, 3N, 50 HZ
E - 12
400 V, 3N, 50 HZ
E - 12 L
400 V, 3N, 50 HZ
E - 18
400 V, 3N, 50 HZ
PACKING AND DEVICE CHECK
The device leaves our stocks properly packed with appropriate symbols and labels. There are also appropriate
instructions for use. In case the packing shows bad handling or damage, it must be reclaimed at transporter
immediately by writing and signing of a damage protocol. Important notice
Important notice
• this instructing guide must be read properly and carefuly because it contains important information about safety
elements, instalation, use
• these recommendations refer to this product
• this product corresponds with valid standards
• this guide must be properly deposited for future use
• keep the children away from manipulation with the product
• when selling or moving the product to another place it is necessary
• to make yourself sure that the staff or the professional service has got acquainted with control and instalation
instructions from enclosed guide
• only authorised person can operate the product
• the device can be used only for baking pizza,
• it cannot be switched on without supervision
• we recommend to have the product checked by proffesional service min. once a year
• only original spare parts can be used for repairs
• the product cannot be cleaned by the water jet or pressure shower
• by damage or break down disconnect all the feeders (water, gas, electricity) and call proffesional service
• producer refuses any responsibility in case of damages caused by wrong instalation, by disobserving of above
mentioned recommendations or by other use etc.
NUMBER OF
POWER
THERMOSTATS
INPUT MAX.
(ITEMS)
(KW)
2
4,8
2
7,2
2
8
2
12
4
9,6
4
14,4
4
16
4
24
DIMENSIONS
CHAMBER DIMEN-
(CM)
98 x 92 x 42 v
98 x 121 x 42 v
131 x 92 x 42 v
131 x 121 x 42 v
98 x 92 x 76 v
98 x 121 x 76 v
2x 72 x 107 x 15 v
131 x 92 x 76 v
2x 107 x 72 x 15 v
131 x 121 x 76 v
2x 107 x 107 x 15 v
3
WEIGHT (KG)
SIONS (CM)
70 x 70 x 15 v
72 x 107 x 15 v
107 x 72 x 15 v
107 x 107 x 15 v
2x 70 x 70 x 15 v
80
110
122
150
125
180
232
245
Werbung
Inhaltsverzeichnis
