Connecting The Speakers - Samsung HT-D6750W Handbuch

Connecting The Speakers

1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the
red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the product by matching
the colors of the speaker plugs to the speaker jacks.
4. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
•
Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
•
The TX card enables communication between the product
and the wireless receiver module.
5. Connect the left and right surround speakers to the wireless
receiver module.
6. Plug the power cord of the wireless receiver module into the
wall outlet.
7. Turn on the product. The product and wireless receiver
module will now communicate with each other and you will
hear sound from the Surround speakers.
Surround
Speaker (L)
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
HT-D6750W_ELS_0221.indd 19 HT-D6750W_ELS_0221.indd 19
Centre Speaker
Surround
Speaker (R)
Subwoofer
Black
FM ANT
WIRELESS
Front/Front Top
Speaker (L)
SPEAKERS OUT
CENTER FRONT FRONT TOP
SUBWOOFER
FRONT FRONT TOP
SPEAKER IMPEDANCE : 3
Front/Front Top
PONENT OUT SPEAKERS OUT
CENTER FRONT FRONT TOP Speaker (R)
SUBWOOFER FRONT FRONT TOP
N VIDEO OUT SPEAKER IMPEDANCE : 3
English
Red
COMPONENT OUT
AUX IN VIDE
TX card
19
2011-03-17 ¿ÀÈÄ 2:45:52 2011-03-17 ¿ÀÈÄ 2:45:52