Sonoff RF Bridge Benutzerhandbuch Seite 5

Operating Instruction
1. Download "eWeLink" APP
2. Power on
Use the Micro USB cable to power the device. After powering on, the device will enter
the quick pairing mode during the first use. The Wi-Fi LED indicator changes in a cycle of
two short and one long flash.
The device will exit the quick pairing mode (Touch) if not paired within 3 mins. If you
want to enter this mode, please long press the pairing button for about 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash release.
3. Add Bridge
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
5